Anchor bolt pullout/Shear tests M24 and M27 bolts used to support 3 advertisement boards with dimension of 12 m long and 5.65 m height each were tested under both pullout and shear. The pullout and shear loads were measured and plotted against bolt displacement. As long as the test load was met with the given […]
A 6-ton MRI Scanning machine was planned to place on the 1st floor of a Tower. To fulfill the specifications of the MRI installation, the existing vibration condition of the floor had been checked since vibration on floor will lead to the distorted images and affect the image quality from scanning. RE conducted the floor […]
2 buildings consisting of a 5-story building and a 2-story building were installed with sensitive machines, which fabricate the microelectronics components such as external hard drives. Those require a free-vibration condition. Thus, 70 locations of machine vibration were measured. In each location, vibration in all three axes including two horizontal directions (X, Y) and one […]
The Load Carrying cCapacity Analysis is used to determine the capacity of the analyzed members or structures to determine whether the tested structures can carry the given load condition or how much load they can withstand. This analysis is necessary when the design details are missing or when there is uncertainty in the design or construction.
Settlement Survey 1 2 3 4 5 6 The settlement survey is used to inspect structures that show structural settlement using a total station (TS) to inspect both vertical structures and horizontal structures. The settlement survey can be used to determine the slope of the settlement and whether such damage will affect the structure. Sloping […]