Anchor bolt pullout/Shear tests

Several types and different configurations of anchor bolts were tested for pullout and shear. First of all, M24 and M27 bolts used to support 3 advertisement boards with dimension of 12 m long and 5.65 m height each were tested under both pullout and shear.

Chemical anchor pull out testing

RE conducted the Chemical Anchor Pull Out Test. This chemical anchor was installed on the floor as moment-resisting support of the new column. Thus, this chemical anchor must be able to resist tension force according to the design. In this case, proof load according to the design was applied. Test frames, load cells, displacement transducers, and the data acquisition system were used.

Pull-off test

The Concrete Pull-Off Test is used to determine the direct tensile strength of a concrete or the bond strength of concrete mixture. The testing equipment consists of metal test circular plates, threaded rods, epoxy, a core drill, a load cell, a displacement transducer, and a hydraulic jack.

Anchor bolt pullout/Shear tests

Several types and different configurations of anchor bolts were tested for pullout and shear. First of all, M24 and M27 bolts used to support 3 advertisement boards with dimension of 12 m long and 5.65 m height each were tested under both pullout and shear.

Chemical anchor pull out testing

RE conducted the Chemical Anchor Pull Out Test. This chemical anchor was installed on the floor as moment-resisting support of the new column. Thus, this chemical anchor must be able to resist tension force according to the design. In this case, proof load according to the design was applied. Test frames, load cells, displacement transducers, and the data acquisition system were used.